2022 New Holland Construction Compact Track Loaders C362

Rent for $500 Daily $1500 Weekly $3300 Monthly By renting equipment from Ocala Tractor, you agree to the following terms: Pricing: All rental prices exclude applicable taxes and insurance fees. Taxes will be added at checkout. Insurance is recommended but not included in the rental price. Assumption of Risk: You acknowledge that renting equipment carries inherent risks, and you assume full responsibility for any injuries, damages, or losses incurred during its use. Proper Use: You agree to operate the equipment solely for its intended purpose and according to provided guidelines. Misuse may lead to additional charges and risk of injury. Liability Waiver: You release Ocala Tractor, its owners, employees, and agents from any liability for injury, loss, or damage arising from your use of rental equipment. Return of Equipment: Equipment must be returned in the same condition as received, accounting for normal wear and tear. Any damages or losses will incur repair or replacement fees. Compliance with Laws: You are responsible for adhering to all applicable laws and regulations related to the use of the rented equipment.
MoreLess
Limited Time Offer!

Rental Price -$450.00

2022 New Holland Construction Compact Track Loaders C362

The NEW C362 Super Boom® compact track loader offers the rugged construction, power, performance to excel on the farm, in rental yards and on construction sites. With 6,200-lb rated operating capacity, and greater breakout force, the C362 lifts more hay bales, hauls heavier pallets, and moves bigger boulders so you keep ahead of schedule..

CONTINUOUS IMPROVEMENT, UNCOMPROMISING PERFORMANCE

300 Series compact track loaders are reliable workhorses that deliver high performance in all conditions. These models build on the strength, visibility, power and smooth ride you’ve come to expect from New Holland compact track loaders with the addition of key enhancements that improve durability, operating ease and overall productivity.

Features may include:

EFFICIENT TO GET THE JOB DONE
  • Super Boom® vertical lift design
  • The C362 is optimized for lift-and-carry operations. The patented New Holland Super Boom® vertical lift linkage offers more height and reach, which allows operators to load material into the center of high-sided truck boxes or hoppers. This allows for visibility to the cutting edge of the loading bucket.
DURABLE AND PRACTICAL
  • Heavy-duty construction
  • The C362 is built with a heavy-duty steel rear door, steel rear hood, and NEW LED front work lights with sidelamps, for extra visibility during nighttime operation.
A BEAST IN CLASS
  • The power, strength and stability to lift more
  • – 6,200-lb rated operating capacity @ 50% tipping load (12,400-lb tipping load)
  • – 114-HP engine @ 2500 RPM
  • – Long track base of 74.2 inches (17.7 inch wide tracks)
  • – Ground pressure of 6.1 psi
  • – Strong bucket tip and lift breakout forces of 12,907 and 12,084 lbs respectively with 78” heavy duty bucket
COMFORT FOR LONG WORK SHIFTS
  • A smooth ride and improved track life
  • The undercarriage design provides a smoother ride with 6 triple flange rollers and double flange idlers.
  • Track life is extended by using steel-embedded tracks rolling on the rubber instead of the steel to provide a reduced noise experience. Plus, one of the widest cabs in the industry makes it easy to get in and out.
  • 2022
  • New Holland Construction
  • Compact Track Loaders
  • C362
  • Compact
  • FPT/ F5B FL413 D*C005
  • Horsepower per SAE J1349 Gross: 114 hp (85 kW) @ 2500 rpm | Horsepower per SAE J1349 Net: 114 hp (85 kW) @ 2500 rpm
  • 207 in3 (3.4 L)
  • Peak: 282 lb-ft (383 Nm) @ 1400 rpm
  • 3.9 in (99 mm)
  • 4.3 in (110 mm)
  • Air intake: Turbocharged w/ waste gate and external cooled EGR
  • HPCR Direct
  • Travel speed, low range: 5.0 mph (8.0 km/h)
  • Breakout Force, lift cylinder: 12,084 lbs (53.8 kN) | Breakout force bucket cylinder: 12,907 lbs (57.4 kN)
  • (with spec belt): 6.1 PSI
  • Pump Flow: 24.2 gpm (91.5 Lpm) | Enhanced High Flow: 41.6 gpm
  • High Flow Relief Pressure: 3,450 psi
  • Bucket hinge pin: 140.2 in (3.56 mm) | Top of ROPS: 84.6 in (437 mm) | Bottom of level bucket, fully raised: 133.3 in (3386 mm) | Dump angle, degrees: 46.1° | Rollback, bucket on ground, degrees: 30° | Track on ground: 74 in (1.88 mm) | Angle of departure, degrees: 37.7° | Clearance circle without bucket: 67.4 in (1712 mm) | Clearance circle rear: 69.5 in (1765 mm)
  • without attachment with coupler: 129.5 in (3.29 mm)
  • Dump reach (max height): 17.2 in (802 mm) @ 45° | Rollback, bucket at full height, degrees: 84°
  • (bottom of belly pan): 12.6 in (0.32 mm)
  • 78.3 in (1.99 mm)
  • Rater Operating Load @50% tip: 6,200 lbs (2812 kg) | Rater Operating Load @ 35% tip: 4,340 lbs | Tipping Load: 12,400 lbs (5625 kg)
  • 16,100 lbs (7311 kg)
  • 1500
  • 3300
  •  Calculation is estimate only.
  •  
  •  
  •  
  •  
  •  
  •  
  •  Quotes are estimates only, actual rate may vary slightly.
  •  One-Way toll road charges will be the responsibility of the customer.
  •  Additional fees and/or duties may apply to International and non-continental US shipping requests.
  • $450.00/Daily
  • Ocala, Florida
  • Rental
  • TBAC362CAB
  • 2022
  • New Holland Construction
  • Compact Track Loaders C362
  • Available
  • Dump reach (max height): 17.2 in (802 mm) @ 45° | Rollback, bucket at full height, degrees: 84°
  • 1500
  • 3300
Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Contact dealer for details.